View LP101WS1-TLB1_4507265.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1/ 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 specification for approval title 10.1? wsvga tft lcd customer model LP101WS1-TLB1 supplier lg display co., ltd. *model lp101ws1 *when you obtain standard approval, please use the above model name without suffix suffix tlb1 () () preliminary specification final specification signature / / / please return 1 copy for your confirmation with your signature and comments. approved by products engineering dept. lg display co., ltd prepared by reviewed by signature approved by g. j. kwon/ manager c. j. jun / manager p. a. choi / engineer www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 2/ 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 contents no item page cover 1 3-2 interface connection 7 10 8-2 packing form 22 9 precautions 23 3-5 signal timing waveforms 7-1 safety 21 7-2 emc 21 8 packing 8-1 designation of lot mark 22 a appendix. enhanced extended display identification data 25 contents 2 record of revisions 3 1 general description 4 2 absolute maximum ratings 5 3 electrical specifications 3-1 electrical charactreistics 6 3-3 lvds signal timing specifications 8 3-4 signal timing specifications 10 3-6 color input data refernece 11 3-7 power sequence 12 4 optical sfecifications 13 5 mechanical characteristics 16 6 reliablity 20 7 international standards www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 3/ 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 record of revisions revision no revision date page description edid ver 0.0 july. 11. 2008 all first draft (preliminary specification) - www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 4/ 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 1. general description general features active screen size 10.1 inches diagonal outline dimension 235(h) ? 143(v) ? .5.2(d,max.) [mm] pixel pitch 0.2175mm ? 0.2175 mm pixel format 1024 horiz. by 576 vert. pixels rgb strip arrangement color depth 6-bit, 262,144 colors surface treatment anti-glare tr eatment of the front polarizer luminance, white 200 cd/m 2 (typ.5 point) power consumption weight 190g (max.) display operating mode transmissive mode, normally white rohs comply yes the lp101ws1 is a color active matrix liquid crystal display with an integral led backlight system. the matrix employs a-si thin film transistor as the active element. it is a transmissive type display operating in the normally white mode. this tft-lcd has 10.1inches diagonally measured active display area with wsvga resolution(1024 horizontal by 576 vertical pixel array). each pixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors. the lp101ws1 has been designed to apply the interface method that enables low power, high speed, low emi. the lp101ws1 is intended to support applications where thin thickness, low power are critical factors and graphic displays are important. in combination with the vertical arrangement of the sub-pixels, the lp101ws1 characteristics provide an excellent flat display for office automation products such as notebook pc. $pouspm%bub 1pxfs &%*%tjhobm1pxfs 5'5-$%1bofm y
$/ 6tfsdpoofdups 1jo 108&3 #-0$, &%*% #-0$, (*1 (buf*o1bofm
4pvsdf%sjwfs$jsdvju -&%#bdlmjhiu"tt ? z -7%4 5jnjoh $pouspm #mpdl pwm & vbl t b d www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 5/ 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 2. absolute maximum ratings the following are maximum values which, if exceeded, may cause faulty operation or damage to the unit. table 1. absolute maximum ratings storage operation 10 20 30 40 50 60 70 80 0 -20 dry bulb temperature [ ? ] 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 wet bulb temperature [ ? ] humidity[(%)rh] values parameter min max units power input voltage vcc -0.3 4.0 vdc at 25 5 c operating temperature t op 050 c1 storage temperature h st -20 60 c1 operating ambient humidity h op 10 90 %rh 1 storage humidity h st 10 90 %rh 1 notes symbol note : 1. temperature and relative humidi ty range are shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 6/ 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 3. electrical specifications 3-1. electrical characteristics table 2. electrical characteristics note) 1. the specified current and power consumption are under the vcc = 3.3v , 25 ? , fv = 60hz condition whereas mosaic pattern is displayed and fv is the frame frequency. 2. this impedance value is needed to proper display and measured form lvds tx to the mating connector. 3. the typical operating current is for the typical surface luminance (l wh ) in optical characteristics. i led is the current of each led?s string, led backlight has 6 strings on it. 4. the led power consumption shown above does not include power of external led driver circuit for typical current condition. 5. the life time is determined as the time at which brig htness of led is 50% compare to that of initial value at the typical led current. values parameter symbol min typ max module : power supply input voltage vcc v dc power consumption pc watt 1 differential impedance zm 90 100 110 ohm 2 led backlight ( with led driver ) : led driver ( @5v ) p driver watt power consumption p bl watt 4 operating voltage v led v operating current per string i led ma 3 life time hrs 5 power supply input current i cc ma 1 unit notes the lp101ws1 requires two power inputs. one is employed to power the lcd electronics and to drive the tft array and liquid crystal. the sec ond input which powers the led bl. t b d t b d www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 7/ 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 3-2. interface connection table 3. module connector pin configuration (cn1) this lcd employs one interface connection, a 40 pin connec tor is used for the module electronics interface. the electronics interface connector is a model 20455-040e-0* manufactured by i-pex. 1, interface chips 1.1 lcd : siw, 1port including lvds receiver 1.2 system : * pin to pin compatible with lvds 2. connector 2.1 lcd :i-pex 20455-040e-0* (locking type) or equivalent 2.2 mating : tbd 2.3 connector pin arrangement [lcd module rear view] pin symbol description notes 1 ct1/nc connector test/no connection(reserved) 2 vdd +3.3v power supply 11 rxin1- lvds differential data input 12 rxin1+ lvds differential data input 13 gnd ground 14 rxin2- lvds differential data input 15 rxin2+ lvds differential data input 16 gnd ground 17 rxclkin- lvds differential clock input 18 rxclkin+ lvds differential clock input 19 gnd ground 20 nc no connection 30 nc no connection 31 vled_gnd led ground 32 vled_gnd led ground 33 vled_gnd led ground 34 ct2/nc connector test/no connection(reserved) 35 s_pwmin system pwm signal input 36 bl_on or nc led enable or no connection[note 1] 37 nc no connection 38 vled +6v~+18v led power supply 39 vled +6v~+18v led power supply 40 vled +6v~+18v led power supply 3 vdd +3.3v power supply 4v edid +3.3v edid power 5 nc no connection 6clk edid edid clock input 7data edid edid data input 9 rxin0+ lvds differential data input 8 rxin0- lvds differential data input 10 gnd ground 22 gnd ground 23 nc no connection 24 nc no connection 25 gnd ground 26 nc no connection 27 nc no connection 28 gnd ground 29 nc no connection 21 nc no connection [note 1] let this pin nc if this pin is not used. (on: 2.0v ? ,off:0~0.4v) www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 8/ 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 description symbol min max unit notes t skew - 400 + 400 ps 85mhz > fclk ? 65mhz lvds clock to data skew margin t skew - 600 + 600 ps 65mhz > fclk ? 25mhz -1/7 - - - maximum deviation of input clock frequency during ssc f dev - ? 3% maximum modulation frequency of input clock during ssc f mod -200khz lvds clock to clock skew margin (even to odd) t skew_eo + 1/7 t clk - v 2.1 0.3 v in lvds input voltage range - v 1.8 0.6 v cm lvds common mode voltage - mv 600 100 |v id | lvds differential voltage notes unit max min symb ol description 3-3-1. dc specification 3-3-2. ac specification 3-3. lvds signal timing specifications www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 9/ 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 < clock skew margin between channel > < lvds data format > 3-3-3. data format - lvds 1 port < spread spectrum > time f center f max f min ' .0% ' dfoufs ' %&7 freq. g0 r5 r4 r3 r2 r1 r0 b1 b0 g5 g4 g3 g2 g1 de vsync hsync b5 b4 b3 b2 x b7 b6 g7 g6 r7 r6 r1 r0 g2 g1 b3 b2 r7 r6 g0 b1 de x current (nth ) cycle r5 r4 b0 g5 vsync hsync b7 b6 r3 r2 g4 g3 b5 b4 g7 g6 previous (n-1 )th cycle next (n+1)th cycle rclk+ ra+/- rb+/- rc+/- rd+/- www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 10 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 3-4. signal timing specifications table 5. timing table this is the signal timing required at the input of the us er connector. all of the interface signal timing should be satisfied with the following specifications and spec ifications of lvds tx/rx for its proper operation. 3-5. signal timing waveforms condition : vcc =3.3v low: 0.3vcc high: 0.7vcc data enable, hsync, vsync hsync data enable vsync data enable t wh t hp t hfp t hbp t vp t wv t vbp t vfp t wha t wva t clk 0.5 vcc dclk item symbol min typ max unit note dclk frequency f clk mhz period thp width t wh width-active t wha width-active t wva period t vp thp horizontal back porch t hbp tclk horizontal front porch t hfp vertical back porch t vbp thp vertical front porch t vfp width t wv tclk hsync vsync data enable t b d www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 11 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 3-6. color input data reference the brightness of each primary color (red,green and blue) is based on the 6-bit gray scale data input for the color ; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. table 7. color data reference input color data red msb lsb green msb lsb blue msb lsb black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red green blue cyan magenta yellow white red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green ... ?? ? green (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 red (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red ? ?? ? red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (00) blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ? ?? ? blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 12 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 3-7. power sequence note) 1. valid data is data to meet ?3-3. lvds signal timing specifications? 2. please avoid floating state of interface signal at invalid period. 3. when the interface signal is invalid, be sure to pull down the power supply for lcd vcc to 0v. 4. led power must be turn on after power supply for lcd and interface signal are valid. value parameter min. typ. max. t 1 0.5 - 10 (ms) t 2 0 - 50 (ms) t 3 200 - - (ms) t 4 200 - - (ms) t 5 0 - 50 (ms) t 6 0 - 10 (ms) t 7 400 - - (ms) units table 7. power sequence table t 6 interface signal, v i (lvds signal of transmitter) led power power supply for lcd vcc 90% 10% 10% 0v 90% t 1 t 2 t 5 valid data 0v off off led on t 7 t 3 t 4 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 13 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 4. optical specification fig. 1 optical characteristic measurement equipment and method table 8. optical characteristics ta=25 c, vcc=3.3v, f v =60hz, f clk = 69.3mhz, i bl = 17 ma values parameter symbol min typ max luminance variation white - 1.4 1.6 3 response time tr r + tr d -1625ms 4 color coordinates viewing angle 5 red rx green blue by white wx 0.283 0.313 0.343 x axis, right( =0 ) r 30 - - degree x axis, left ( =180 ) y axis, up ( =90 ) y axis, down ( =270 ) l 30 - - degree u 10 - - degree d 20 - - degree wy 0.299 0.329 0.359 gray scale 2.2 6 gx gy ry bx contrast ratio cr 1 surface luminance, white l wh 200 - cd/m 2 units notes 2 lcd module optical stage(x,y) pritchard 880 or equivalent 50cm optical characteristics are determined after the unit has been ?on? and stable for approximately 30 minutes in a dark environment at 25 c . the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . fig. 1 presents additional information conc erning the measurement equipment and method. t b d t b d www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 14 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 gray level luminance [%] (typ) l0 l7 l15 l23 l55 l63 l31 l39 l47 note) 1. contrast ratio(cr) is defined mathematically as surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the average of 5 point across the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 1. l wh = average(l 1 ,l 2 , ? l 5 ) 3. the variation in surface luminance , the panel total variation ( white ) is determined by measuring l n at each test position 1 through 13 and then defined as followed numerical formula. for more information see fig 2. maximum(l 1 ,l 2 , ? l 13 ) white = minimum(l 1 ,l 2 , ? l 13 ) 4. response time is the time required for the display to transition from white to black (rise time, tr r ) and from black to white(decay time, tr d ). for additional information see fig 3. 5. viewing angle is the angle at which the contra st ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the lcd surface. for more information see fig 4. 6. gray scale specification * f v = 60hz t b d www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 15 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 fig. 3 response time the response time is defined as the following figure and shall be measured by switching the input signal for ?black? and ?white?. tr r tr d 100 90 10 0 % optical response white black white fig. 2 luminance : active area a : h/4 mm b: v/4 mm points: 13 points h,v active area 1 3 2 5 4 h a b v 678 910 11 12 13 10mm 10mm fig. 4 viewing angle normal y eye = 0 , right = 180 , left = 270 , down = 90 , up www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 16 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 5. mechanical characteristics the contents provide general mechanical characteristics for the model lp101ws1. in addition the figures in the next page are detailed mechanical drawing of the lcd. horizontal 235.0 0.5 mm vertical 143.0 0.5 mm vertical 128.70 mm vertical 125.28 mm weight 190g (max.) surface treatment anti-glare tr eatment of the front polarizer thickness 5.2mm (max) horizontal 226.00 mm horizontal 222.72 mm active display area bezel area outline dimension www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 17 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 note) unit:[mm], general tolerance: 0.5mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 18 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 note) unit:[mm], general tolerance: 0.5mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 19 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 [ detail description of side mounting screw ] notes : 1. screw plated through the method of non-electrolytic nickel plating is preferred to reduce possibility that results in vertical and/or horizontal line defect due to the conductive particles from screw surface. * mounting screw length (a) = 1.5(min) /1.8(max) * mounting screw hole depth (b) = 1.8(min) * mounting hole location : 2.8(typ.) * torque : 2.0 kgf.cm(max) (measurement gauge : torque meter) section a-a www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 20 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 6. reliability environment test condition { result evaluation criteria } there should be no change which might affect the practical display function when the display quality test is conducted under normal operating condition. no. test item conditions 1 high temperature storage test ta= 60 c, 240h 2 low temperature storage test ta= -20 c, 240h 3 high temperature operation test ta= 50 c, 50%rh, 240h 4 low temperature operation test ta= 0 c, 240h 5 vibration test (non-operating) sine wave, 10 ~ 500 ~ 10hz, 1.5g, 0.37oct/min 3 axis, 1hour/axis 6 shock test (non-operating) half sine wave, 180g, 2ms one shock of each six faces(i.e. run 180g 6ms for all six faces) 7 altitude operating storage / shipment 0 ~ 10,000 feet (3,048m) 24hr 0 ~ 40,000 feet (12,192m) 24hr www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 21 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 7. international standards 7-1. safety 7-2. emc a) ansi c63.4 ?methods of measurement of radio- noise emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. ?american national standards institute(ansi), 1992 b) c.i.s.p.r ?limits and met hods of measurement of radio interf ace characteristics of information technology equipment.? international special committee on radio interference. c) en 55022 ?limits and methods of measurement of radio interface characteristics of information technology equipment.? european committee for electrotechnical standardization.(cenelec), 1998 ( including a1: 2000 ) a) ul 60950-1:2003, first edition, underwriters laboratories, inc., standard for safety of information technology equipment. b) can/csa c22.2, no. 60950-1-03 1 st ed. april 1, 2003, canadian standards association, standard for safety of information technology equipment. c) en 60950-1:2001, first edition, european committee for electrotechnical standardization(cenelec) european standard for safety of information technology equipment. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 22 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 8. packing 8-1. designation of lot mark a) lot mark abcdefghi jklm a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is attached to the backside of the lcd module. this is subject to change without prior notice. 8-2. packing form a) package quantity in one box : 40 pcs b) box size : 395mm ? 390mm ? 309mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 23 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mo unting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plat e to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently wi th absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possib le. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage : v= ? 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperatur e change. condensation makes damage to polarizer or electrical contacted parts. and after fadi ng condensation, smear or spot will occur. (5) when fixed patterns are displayed for a l ong time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimized the interference. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 24 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wris t band etc. and don?t touch interface pin directly. 9-3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 9-4. precautions for strong light exposure 9-5. storage (1) when the protection film is peeled off, static el ectricity is generated bet ween the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarizer with a small amount of glue. if some stress is applied to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film without rubbing it against the polarizer. (3) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the polarize r after the protection film is peeled off. (4) you can remove the glue easily. when the glue remains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precaution s for protection film when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 25 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 appendix a. enhanced extended di splay identification data (eedid tm ) 1/3 byte (dec) byte (hex) field name and comments value (hex) 0 00 header 00 1 01 header ff 2 02 header ff 3 03 header ff 4 04 header ff 5 05 header ff 6 06 header ff 7 07 header 00 8 08 eisa manufacture code ( 3 character id ) lpl 32 9 09 eisa manufacture code (compressed asc ? ) 0c 10 0a panel supplier reserved - product code 0000h 00 11 0b ( hex. lsb first ) 00 12 0c lcd module serial no - preferred but optional ("0" if not used) 00 13 0d lcd module serial no - preferred but optional ("0" if not used) 00 14 0e lcd module serial no - preferred but optional ("0" if not used) 00 15 0f lcd module serial no - preferred but optional ("0" if not used) 00 16 10 week of manufacture 0 weeks 00 17 11 year of manufacture 2008years 12 18 12 edid structure version # = 1 01 19 13 edid revision # = 3 03 20 14 video input definition = digital signal 80 21 15 max h image size (rounded cm) = 30 cm 1e 22 16 max v image size (rounded cm) = 19 cm 13 23 17 dis play gamma = (gamma*100)-100 = example:(2.2*100)-100=120 = 2.2 gamma 78 24 18 feature support (no_dpms, no_active off/very low power, rgb color display, timing blk 1,no_ gtf) 0a 25 19 red/green low bits (rxry/gxgy) 8a 26 1a blue/white low bits (bxby/wxwy) 35 27 1b red x rx = 0.572 92 28 1c red y ry =0.344 58 29 1d gre e n x gx = 0.338 56 30 1e gre e n y gy =0.545 8b 31 1f blue x bx = 0.156 28 32 20 blue y by = 0.12 1e 33 21 white x wx =0.313 50 34 22 white y wy =0.329 54 35 23 established timing 1 (00h if not used) 00 36 24 established timing 2 (00h if not used) 00 37 25 manufacturer's timings (00h if not used) 00 38 26 standard timing id1 (01h if not used) 01 39 27 standard timing id1 (01h if not used) 01 40 28 standard timing id2 (01h if not used) 01 41 29 standard timing id2 (01h if not used) 01 42 2a standard timing id3 (01h if not used) 01 43 2b standard timing id3 (01h if not used) 01 44 2c standard timing id4 (01h if not used) 01 45 2d standard timing id4 (01h if not used) 01 46 2e standard timing id5 (01h if not used) 01 47 2f standard timing id5 (01h if not used) 01 48 30 standard timing id6 (01h if not used) 01 49 31 standard timing id6 (01h if not used) 01 50 32 standard timing id7 (01h if not used) 01 51 33 standard timing id7 (01h if not used) 01 52 34 standard timing id8 (01h if not used) 01 53 35 standard timing id8 (01h if not used) 01 established timings standard timing id header vendor / product edid version display parameters panel color coordinates t b d www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 26 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 appendix a. enhanced extended di splay identification data (eedid tm ) 2/3 byte (dec) byte (hex) field name and comments value (hex) 54 36 pixel clock/10,000 (lsb) 69.3 mhz @ 59.96hz 12 55 37 pixel clock/10,000 (msb) 1b 56 38 horizontal active (lower 8 bits) 1280 pixels 00 57 39 horizontal blanking(thp-ha) (lower 8 bits) 126 pixels 7e 58 3a horizontal active / horizontal blanking(thp-ha) (upper 4:4bits) 50 59 3b vertical avtive 800 lin es 20 60 3c vertical blanking (tvp-ha) (de blanking typ.for de only panels) 22 lines 16 61 3d vertical active : vertical blanking (tvp-ha) (upper 4:4bits) 30 62 3e horizontal sync. offset (thfp) 48 pixels 30 63 3f horizontal sync pulse width (hspw) 32 pixels 20 64 40 vertical sync offset(tvfp) : sync width (vspw) 3 lines : 6 lines 36 65 41 horizontal vertical sync offset/width (upper 2bits) 00 66 42 horizontal image size (mm) 304 mm 30 67 43 vertical image size (mm) 190 mm be 68 44 horizontal image size / vertical image size 10 69 45 horizontal border = 0 (zero for notebook lcd) 00 70 46 vertical border = 0 (zero for notebook lcd) 00 71 47 non-interlace, normal display, no stereo, digital separate ( vsync_neg, hsync_neg ), de only note : lsb is s et to '1' if panel is de-timing only. h/v can be ignored. 19 72 48 flag 00 73 49 flag 00 74 4a flag 00 75 4b data type tag (descriptor defined by manufacturer ) 00 76 4c flag 00 77 4d descriptor defined by manufacturer 00 78 4e descriptor defined by manufacturer 00 79 4f descriptor defined by manufacturer 00 80 50 descriptor defined by manufacturer 00 81 51 descriptor defined by manufacturer 00 82 52 descriptor defined by manufacturer 00 83 53 descriptor defined by manufacturer 00 84 54 descriptor defined by manufacturer 00 85 55 descriptor defined by manufacturer 00 86 56 descriptor defined by manufacturer 00 87 57 descriptor defined by manufacturer 00 88 58 descriptor defined by manufacturer 00 89 59 descriptor defined by manufacturer 00 90 5a flag 00 91 5b flag 00 92 5c flag 00 93 5d data type tag ( ascii string ) fe 94 5e flag 00 95 5f ascii string l 4c 96 60 ascii string g 47 97 61 ascii string p 50 98 62 ascii string h 68 99 63 ascii string i 69 100 64 ascii string l 6c 101 65 ascii string i 69 102 66 ascii string p 70 103 67 ascii string s 73 104 68 ascii string l 4c 105 69 ascii string c 43 106 6a ascii string d 44 107 6b manufacturer p/n(if<13 char--> 0ah, then terminate with asc ? code 0ah,set remaining char = 20h) 0a timing descriptor #3 timing descriptor #1 timing descriptor #2 t b d www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 27 / 27 lp101ws1 liquid crystal display ver. 0.0 july. 23, 2008 appendix a. enhanced extended di splay identification data (eedid tm ) 3/3 byte (dec) byte (hex) field name and comments value (hex) 108 6c flag 00 109 6d flag 00 110 6e flag 00 111 6f data type tag ( ascii string ) fe 112 70 flag 00 113 71 ascii string l 4c 114 72 ascii string p 50 115 73 ascii string 1 31 116 74 ascii string 4 34 117 75 ascii string 1 31 118 76 ascii string w 57 119 77 ascii string x 58 120 78 ascii string 5 35 121 79 ascii string - 2d 122 7a ascii string t 54 123 7b ascii string l 4c 124 7c ascii string a 41 125 7d ascii string 1 31 126 7e extension flag (# of optional 128 panel id extension block to follow, typ = 0) 00 127 7f check sum (the 1-byte s um of all 128 bytes in this panel id block s hall = 0) 63 timing descriptor #4 checksum t b d www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LP101WS1-TLB1

	To Download LP101WS1-TLB1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .